Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Spark plug wrench suggestion?
#1
I've never worked on these small engines with the plugs sunk down into the valve cover. Do you have any suggestions on wrenches that get the job done easily?

I see this one on Amazon.
http://www.amazon.com/AMPRO-T33338-8-Inc...lug+socket

It looks like one plug is underneath the air intake. I'm assuming you have to remove it to get to the plug?

John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
Reply
#2
any spark socket get it loose.
but use a rubber hose to pull it out or the snake grabber.
yes on intake but its a snap all that.

the ngk is BKR6ES
16mm (5/8")
any spark socket that size fits. im sure you have extensions and a universal joint is of no use.
with 4 valves this spot is only place it can go. dead center.


http://www.amazon.com/TEKTON-1785-8-Inch...lug+socket.

$2.49
http://www.harborfreight.com/58-in-high-...67792.html


and a free ruler all in one day...... lol

the rubber inside all spark sockets are short lived.
so i use a 1/4 id hose extract them and to start the treads, never use tools to start spark plugs. its soft alum. head. and do not over torque them.

i have a mag extractor, and a grabber, all 3 work.

seen on my tuneup page
this
http://www.fixkick.com/IGN_timing/25v6-2...81%29w.jpg

sold at harbor fright too. and many others.

torque spec is 21 foot lbs, tiny.

http://www.fixkick.com/specs/torque1.html

http://www.harborfreight.com/24-inch-2-i...94162.html


$3

can also get things dropped, no arms can fit..... its and very useful tool
http://www.fixkick.com
Reply
#3
fixkick,

I see that there are two plugs shown in the fsm. BPR5ES and the BKR version you mention. Do you have a preference of one or the other. The BKR says its an ISO tip or something like that.

John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
Reply
#4
i use what NGK tells me, they have newer numbers now , from orig. factory FSM stated number.
here is what i use,

http://www.ngksparkplugs.com/part_finder...efault.asp

there are like 3 choices. each more expensive and longer lasting, from stock steel to platimum and ? more.
http://www.fixkick.com
Reply
#5
They are saying to use a plug gap of .032. I know that's wrong. I believe it's .028.

But, they no longer show the BPR plug. Just the BKR.
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)