How do I remove heater control panel 89 Tracker?

[shoalsgary]

I've got the top loose by the vents, and bottom loose by the ashtray and lighter, but it is solidly fastened by the heater controls!

[fixkick]

just the panel.
ok the panel is cable controls, has 3 cables, and must be removed first. or disconnected on the ends first.
http://www.acksfaq.com/96-FSM-v1-1a-pdf.htm

the 96 is near same. at this point.
page 14
remove ash tray, then.....

linked off my dash pull page.
controls.

[harryhydro]

Hi: I had to replace the light behind mine. The stencil snaps out first. You need to get behind it with something thin, like a knife or small flat-head screwdriver. The screws are behind that.
-Hydro