Bracket screwed up

[Beastcub]

Im reassembling my intake manifold and suck for the top of my engine (94 Sidekick JLX, 4 door, 4wd, 4 door, ,fed) and I cant remember where this L shaped bracket goes.... I took the manifold off to clean out the EGR ports (which is done) and I just cant remember...

[fixkick]

those are the 2 engine pulling brackets.
on front  right and 1 rear left, (drivers seat perspectives)
to the corner manifold bolts/stud mounts.

here is my 97 , dropping in off those 2 brackets OEM stock

https://fixkick.com/engine/97-motor-pull...ge_47.html

[Beastcub]

No that rear left bracket it still on. I never took it off. I only took off the intake manifold, fuel rail, egr, and throttle body (air intake tube too).

[Beastcub]

has to be on the right / passenger side somewhere. I have the passenger side front bracket ready to go on and the upper intake bracket too..

[fixkick]

has to be on the right / passenger side somewhere. I have the passenger side front bracket ready to go on and the upper intake bracket too..

you forgot the alternator top  mount??

[Beastcub]

pic 33 of your 97 engine pull.. this looks like the bracket. But where does it go? I didnt remove the alternator...

[fixkick]

the manifold has a huge brace on its BOTTOM side to the frame. is that missing?
I will pull up the EPC, catalog of all parts on this intake.
next

[fixkick]

there is a cruise control bracket unused .
the alternator , drawing shows same exact size and angle.

lacking that top part the alternator now lost its top triad mount.

[fixkick]

part id 13 no less?

[fixkick]

belt page drawing 3


https://fixkick.com/belts.html