Valve Lash on 1992 8 Valve TBI

[sina27]

Hello,
Got a 1992 Tracker 4WD 5 speed TBI. 
Im going to adjust my valve lash. 

I'm seeing some discrepancies in the actual lash specs: 
On the 8 valve FixKick website, it says cold lash for 8 valve is: 
.0051 - .0067 inch (intake)
.0063 - .0079 inch (exhaust).

The fixkick page also referenced this PDF showing alll the specs for all geo years:
https://fixkick.com/All-Pdfs/Engine-Tune...tuneup.pdf

On this page, for a 1992 1.6 TBI, it says the clearances for cold is:
.3140 inch  (intake)
.0102 - .0120 inch (exhaust) 

Confused why the PDF seems so off, 0.3inchs seems like huge clearance!???
Is the PDF wrong?

[fixkick]

the last is only different if you read the suzuki manual then GM. (GEO)
GM loves to average or round off. they think that makes the job easier I guess but is not any kind of worry
that PDF is bogus and my error, back in 2007 and is the wrong PDF from a top after market , fake factory service manual (Chiltons ) or the like and was 1 click error me picking the wrong PDF
sorry , you'd need USE a straw Hat rim to set that gap.... (blusH)

fact is it is wrong.