Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rhino software and ALDL Cable...WIN!
#31
the problem with any tool like this
is
1: works on all 100+ ECUs' from Suzuki 1988 to 2004? , it won't (it will talk sure)
2: language modes.
3: scales, Metric or imperial (USA silliness,still, gallons, miles, feet, PSI (what's a pound , inches of Mercury not KPA, )
I got mine to work using old RS232. then the FTDI chip. (then made my own scaling tables. the MAF was the most hard, but got it, using Excel match curve fits)
Suzuki used like 5 different ETC in Europe.
http://www.fixkick.com
Reply
#32
Tell me about it...
The communication with ecu is the easiest thing. Presentation (with any language and any units) on the screen is also easy.
Whole PITA is to find out right address-function mapping and conversion factors for received raw data.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)