P0113 code

[98TrackerMan]

Howdy All.
got a "service eng soon" light- got out the OBDII and came up with code P0113,intake air temp sensor 1 circuit high- what should i do about this one?
Had to get to work so didn't do anything yet. Get part & Just replace it? where is it located? I have a 1998 Chevy tracker 4x4,4Dr 98K miles
Just was going to take it in for State Inspection too this wknd. Insp is up end of Oct. What a bummer.
Thanks for any assistance 98TrackerMan

[fixkick]

the IAT is unplugged, at the air cleaner. base box. G16, the J18 sport engine, is on lid of air cleaner box. both engine in same 6 sq-in domain.

most times, last air cleaner swap, makes this connector fall off. or was removed and forgotten.
this is the lest important sensor. it only does fine , adjustments to maf readings already temperature corrected.
see air clean , back side is IAT , in rubber grommet

[98TrackerMan]

Just cked in, Ok I'll check it out. was at the ur website in A.M. and couldn't peruse because of time, so to the Forum I went- never disappointed here!
As always thanks for your help. Have a Great wknd!
98TrackerMan

[fixkick]

you to, and glad to help you.!