Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bosch 02 Sensor, 22MM or 7/8" bolt?
#1
Anyone know if the bosch 02 sensor is 22m or 7/8" on the bolt? I want to purchase a socket and I read the 7/8 wrench can strip a 22mm due to the slight difference.
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
Reply
#2
mine is 7/8" split socket, official 02 socket.
just looked.
http://www.fixkick.com
Reply
#3
fixkick,

I was going to try this offset style...
http://www.amazon.com/gp/product/B00390B...PDKIKX0DER

And a thread chaser....
http://www.amazon.com/gp/product/B000XET...PDKIKX0DER

Would a long split socket style be better? Not sure how much room is on the side of the sensor to use an offset.

John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.
Reply
#4
what works best depends on what sensors. front or rear.
cal/fed cars?
all the above work, but the socket is way more strong than any spanner on earth. the split side, socket for 02s. works best. in most cases.
http://www.fixkick.com
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)