01-17-2016, 06:10 AM
Kick, I`ve got a 94 Tracker 2dr autom 3 speed, 1.6l 8v 4wd AND a 95 Sidekick 2 dr manual 5 speeds stick 1.6l 8v 4wd.
The frame on my Tracker is competely rusted, I can`t even think about welding it. My floor was also became like a swiss cheese(a lot of holes). So after many weeks of seraching I found this Sidekick(just few weeks ago). At first I was searching for a frame, but I got this Sidekick with a solid frame and floor for $500! I was thinking of installing the 94 autom trany on the 95 Sidekick but after trying to drive with the manual trany I`ll keep it this way.
So, I`ll take parts from the Tracker to install it on the Sidekick. Both are OBD1 so a good thing. It`s what I did with the cluster. there`s was a tachom in the Tracker so I swapped the cluster.(that`s why I asked some questions about it)
Good thing I`ve read your link cause stripping the thread in the block wouldn`t be a funny thing.
I`ll take some measure to see where I`m going to install those gauges.
The frame on my Tracker is competely rusted, I can`t even think about welding it. My floor was also became like a swiss cheese(a lot of holes). So after many weeks of seraching I found this Sidekick(just few weeks ago). At first I was searching for a frame, but I got this Sidekick with a solid frame and floor for $500! I was thinking of installing the 94 autom trany on the 95 Sidekick but after trying to drive with the manual trany I`ll keep it this way.
So, I`ll take parts from the Tracker to install it on the Sidekick. Both are OBD1 so a good thing. It`s what I did with the cluster. there`s was a tachom in the Tracker so I swapped the cluster.(that`s why I asked some questions about it)
Good thing I`ve read your link cause stripping the thread in the block wouldn`t be a funny thing.
I`ll take some measure to see where I`m going to install those gauges.