Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
coolant flowing between iac and isc ?
#56
Tracker 94 1.6l 8v, autom 2d 4wd.(had to re read all posts to find this)
make signature so i dont have to re read all posts every day,please.
is it 3speed or 4, (i correct my 2/3 typo)
4 speed is OD lamp and P/N switch on console,if not, its a 3speed, and has vacuum line.

oil gauges

if wanting stock sender and new gauge to work same time.
that takes a Tee fitting, NPT

just good old home depot pipe brass section, as 3 ends, each are tapped to 1/8 NPT size (usa spec pipe) as is your gauge all NPt

THE OIL engine, does move down the line, and does compress the air up to 50 psi,in line,, so the more there is pressure, the more oil goes down line
don't worry, these gauges work on all fluids, oil , air ,water, etc. (not acid sure)
air is a fluid in physics.
http://www.fixkick.com
Reply


Messages In This Thread
RE: coolant flowing between iac and isc ? - by fixkick - 01-17-2016, 02:42 AM

Forum Jump:


Users browsing this thread: 4 Guest(s)