Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
coolant flowing between iac and isc ?
#53
tranny? (you have 3 or 4speed a/t ?)
the oil is engine oil. (the a/t boxes have line test ports,)
all i know s 94tbi, you should make signature?
eg:
94 sidekick ,8v, 2wd/4wd, some doors, and what transmission,3.4/5speed.

the oil test port, is on left of engine block, and is not USA NPT pipe sized. (bad news yes) Nor it is metric, , !!!

if car is 5 speed stick? the a/t rad cooler. ports just stay open and there are no hoses here on any 5speed.

the oil pressure gauge,(engine) is whole topic long.

http://www.fixkick.com/engine/97-motor-p...e-good.jpg

my buy-parts.html , page covers this.
the engine block port is, not Gringo pipe not NPT, not national pipe threaded. sad yes.l
i use the proper adapters, BSPT 1/8"-28tpi (tpi is threads per inch)

i buy adapters, BSPT to NPT 1/8" (to protect my block)
then use a NPT "TEE" fitting to my gauge and to old sender. I run both at same time or buy meter that has built in pressure warning lamp.
http://www.fixkick.com/buy-parts.html#Sender

did that back in 2007.

the first japan engines copied (cloned) British engines. (Nissan did for sure, aka DATsun)
so had to make British senders
this is why its not metric, THEN, but is now.
http://www.fixkick.com
Reply


Messages In This Thread
RE: coolant flowing between iac and isc ? - by fixkick - 01-16-2016, 11:27 PM

Forum Jump:


Users browsing this thread: 3 Guest(s)