Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
coolant flowing between iac and isc ?
#29
ok 1995, ill tell you 3 things for that. car.
the bottom tag part number now
what fits
and what style, (size pins and locations) on yours.
next
the 2wd has no tacho, its on 4wd only'
the parts lists show this clearly, i have full illistated parts lists (books,etc) i hand
I agree, the original cluster was removed.
more soon

http://www.fixkick.com/sensors/speedo/cl...frack.html
i have the above condensation i made and the full pdf of all head made all EPC data ,on heads.
note they had 8 clusters, just in USA, mPH clusters, not KPH, lots more would wide and the stupid dick nixion 85mph bs heads... tricky dick we called him,
i bet your 4wd cluster lamp is dead too..(UNLESS last guy ,added the lamp there, as can be done)
you have not stated the transmission, and that matter too. 3/4/5 sPEEDS?
like overdrive lamp, and P?N mode for 4speed. etc.
my page is unique,no body has this but me,, showing all that and connector used.!
the variances are huge, even cal/fed
the fed has nag switch wires. the calif.does not, but since i remove all nag wires, they are same head.
now my guess
PO, prev.owner ripped out 61am0 head and stuffed in a 63ab1
the bottom sticker has full part number

now the pdf, linked off same page
your connector ,was 16x13 (pin counts, and 2 total) not counting NAG port 4 pins, that i never plug in,

http://www.fixkick.com/sensors/speedo/al...edo16L.pdf



many of heads are now dead.
and now swapped.
in fact i had to use 3 heads to get 1 perfect head.
used,parts.
i can also match up internal parts between heads, have that list tool

so parking lamps are dead in cluster
turn the dash dimmer up.
or PO;s love to steal those to make lower lamps work, a dirty trick and easy fix.
if the speedo works that is blessing ,most make huge noise, bounce or stick
the bottom sticker tells all
some lamp that are missing, dead) say you have 4 speed, (still dont know) and the P/N lamp is out
you may find the circuit there and only the lamp holder is missing. I cured many like that.
to find out what really there in 5min work?
a flash light , at night
shine in the lense,see all lamps and all names on all lamps, all those can work, with sockets present
easy huh?

the cheapest kick made was
2 doors
2wd
5speed
and no tacho
and with top off,weighed in at 2000 lbs even, very very light car and joy in snow or off road.
nimble is the word.
no a/c
no p/s
no air bags.
no ABS
very very inexpensive... and my favorite one... 91 is first best one.
http://www.fixkick.com
Reply


Messages In This Thread
RE: coolant flowing between iac and isc ? - by fixkick - 01-10-2016, 01:40 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)