11-25-2014, 02:44 AM
the word NO has many meanings
1: the lamp is dead, (out)
2; i install the jumper "diag" and it flashes code 12 (meaning the ECU is happy, no errors0
3: the lamp will not flash at all. when the Diag jumper is placed
The CEL lamp most glow keyon, does it? saying "no CEL tells me" it does not glow keyon. is that true?
then with the jumper in place the CEL must flash something, if NOT the ECU is bad. (a common action for BACKUP MODE FAILURES)
does if flash code 12 when you demand it (demand means using the paper clip in the DLC socket per my page on same)
?
keyon
CEL glows steady , then goes out running.
you insert the paper clip
the CEL flashes 12s, does it flash 12.
all of these answers only gets use off page one top .of page, on ECU diagnosis, this is the first step on all cars. new cars we scan but is the same results. no DTCs stored and all sensors look good , live data on new cars)
on your car all we have is that silly CEL. so , tell me what it does,. please.
1: the lamp is dead, (out)
2; i install the jumper "diag" and it flashes code 12 (meaning the ECU is happy, no errors0
3: the lamp will not flash at all. when the Diag jumper is placed
The CEL lamp most glow keyon, does it? saying "no CEL tells me" it does not glow keyon. is that true?
then with the jumper in place the CEL must flash something, if NOT the ECU is bad. (a common action for BACKUP MODE FAILURES)
does if flash code 12 when you demand it (demand means using the paper clip in the DLC socket per my page on same)
?
keyon
CEL glows steady , then goes out running.
you insert the paper clip
the CEL flashes 12s, does it flash 12.
all of these answers only gets use off page one top .of page, on ECU diagnosis, this is the first step on all cars. new cars we scan but is the same results. no DTCs stored and all sensors look good , live data on new cars)
on your car all we have is that silly CEL. so , tell me what it does,. please.
http://www.fixkick.com