09-08-2014, 02:22 AM
(This post was last modified: 09-08-2014, 02:31 AM by cosmic_splatter.)
I had an air noise on the window. I watched a youtube video that said to try a silicone on the rubber to soften it and better seal the window. That seemed to work, but what happened is that the silicone became a little sticky and was grabbing the window in the front as I rolled it up. I cleaned it up a bit and window is now rolling up normally.
I did learn the cool trick from the FSM on how to remove the crank handle. You use a rag and run it back and forth at the base of the crank. Unbelievable, the little retainer clip pops right out! Very cool!
John
I did learn the cool trick from the FSM on how to remove the crank handle. You use a rag and run it back and forth at the base of the crank. Unbelievable, the little retainer clip pops right out! Very cool!
John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.