A/T 4speed fails, car wont move until hot.

[zukitrek]

missing , you mean its stuck in 1st when you select 3rd.
missing can be slip too.
Yes pretty much that, but Ill recheck tonight
its in a gear, and does not slip. and acts like it stuck (not missing) in 1st gear.
Yes also to the above line
you can see what gear it in, the engine rpm didnt change,, so the gear ratio didnt change nor speed, so it fail to shift.

its a bad transmission. if it fails that.
the the manual mode valve is failing to send pressure to 3rd gear. but oddly the solenoid can,
i do not have an accurate hydralic map of this box. all 5 FSm books i have fail to show that.
the last year they had that is a real 95 sidekick FSM>

Ill check again tonight and report back to you with a video.

Good day.

PS: No idea what could be wrong with that DLC connector shutting engine off when clip inserted? Ohh OK ill disassemble ECU and see and send pics back to you in case something looks odd.

Cheers