Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Starts, runs 30 seconds, then dies
#5
the compression is 160, x4
at 100PSI it runs, same compression as your lawn mower,
then at 50 it dies.. and floods..

the cam timing can jump around.. for mostly 2 reasons, but most die and stay dead but one in 100 might be loose enough to bounce around for sure cranking,
ever see this.
endless folks had this, its #1 all time bad deal on this car
and even the top cam cog rim cracks and does crazy stuff too. I have a page covers all that.
https://fixkick.com/t-belt/snouts/html/image_8.html

not saying this it, only that no body skips a compression test on any dead engine (at time of death)
IT can bounce around,,
case in point, car dies, and owner cranks it and is dead.
day 2, same, day 3,4,5,6 then it back fires (bam) and the belt moves to the other end. and WOW is starts (this is CHAOS,) expect that and win, catch compression low.. win.
60k mile per belt we can show you belts in 100 different odd conditions, no need to talk about them but cogs stripped , stretched belt and 1/ 2 shredded are all common. (or GONE..)
mostly the cam wants to retard, but can bounce back.
http://www.fixkick.com
Reply


Messages In This Thread
RE: Starts, runs 30 seconds, then dies - by fixkick - 02-05-2020, 07:30 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)