Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting rods/pistons
#1
95 tracker 1.6l 16v
-So I had got the motor running and it ended up blowing a rod and the side of the motor out. its was on my first cylinder.. Sad so I have torn it all apart and am going to need a piston and connecting rod. Now I have a 8v lower end with everything in it, I am going to use the shell of it and put my 16v parts in it. Now I am hoping to just buy a piston head and reuse a connecting rod from the 8v donor... I noticed on my 16v connecting rods there is numbers 73 73 74 75 and on the 8v its just 74 74 75 75... not interchangeable rods? what order?
Reply


Messages In This Thread
Connecting rods/pistons - by justgoit - 11-06-2015, 06:21 AM
RE: Connecting rods/pistons - by fixkick - 11-06-2015, 07:13 AM
RE: Connecting rods/pistons - by justgoit - 11-06-2015, 07:20 AM
RE: Connecting rods/pistons - by fixkick - 11-06-2015, 08:06 AM
RE: Connecting rods/pistons - by justgoit - 11-06-2015, 08:41 AM
RE: Connecting rods/pistons - by fixkick - 11-07-2015, 12:32 AM
RE: Connecting rods/pistons - by fixkick - 11-07-2015, 01:45 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)