the canary gear is reverse. its no synchro. and is used almost not at all and if it grinds the clutch is bad.
my guess is the pressure plate fingers are overheated and burned an now non linear. poor release
your shifting with no clutch, in effect.
im sure the clutch is bad, and dragging, setting the cable over tight will help some but overloads the throwout bearing
the 1 inch rule is form zero play but im sure you know that.
and it releases way before you hit that 1 inch. yours dont. release. not 100% release
it can also be just a cracked disc. or swelled from oil.
sorry but it needs all 3 parts clutch. IMO
the reason for the 1 inch rule is easy, the cables seize or the pedal loves to crack in the actual pedal. and will no longer move the bell arm 1inch.
the cable actual causes the pedal to break. very common,,,, and id not like to see some one buy a clutch for a bad pedal.. or cable.
but that is not you.
cheers and happy hunting.
my guess is the pressure plate fingers are overheated and burned an now non linear. poor release
your shifting with no clutch, in effect.
im sure the clutch is bad, and dragging, setting the cable over tight will help some but overloads the throwout bearing
the 1 inch rule is form zero play but im sure you know that.
and it releases way before you hit that 1 inch. yours dont. release. not 100% release
it can also be just a cracked disc. or swelled from oil.
sorry but it needs all 3 parts clutch. IMO
the reason for the 1 inch rule is easy, the cables seize or the pedal loves to crack in the actual pedal. and will no longer move the bell arm 1inch.
the cable actual causes the pedal to break. very common,,,, and id not like to see some one buy a clutch for a bad pedal.. or cable.
but that is not you.
cheers and happy hunting.
http://www.fixkick.com