Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Timing belt tracking off center
#2
the head had guide pins, of missing the head cants and will never track a belt.
bad belt.
old belt used and put on , reversed.
bottom cog wheel, center of it and crank snout no longer fit right, due to never setting the 94ft/lbs spec torque there

oh boy tracker dont track, right... it's and omen.

most simple fail is the index tab /tang on back of idler, not indexed and is now canted.
http://www.fixkick.com/t-belt/drift.html

good luck to you
http://www.fixkick.com
Reply


Messages In This Thread
Timing belt tracking off center - by lost track - 07-21-2014, 07:24 AM
RE: Timing belt tracking off center - by fixkick - 07-21-2014, 07:34 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)