04-16-2020, 01:50 PM
(This post was last modified: 04-16-2020, 02:32 PM by HenryBlue.
Edit Reason: Typo
)
Hi everybody, first post here.
Recently bought a 1990 Geo Tracker with 97K miles. The guy I bought it from put in a new fuel tank and pump, but did not install a sending unit. I can’t find one new anywhere.
I’m sure there are others on here that have had issues finding OEM sending units.
However, I did find a “universal” one that’s adjustable for depth, and that reads empty at 240 Ohms, and reads full at 33 Ohms. I know from other posts here that Gen 1 sending units typically read around 120 empty, and 3 Ohms full.
I know next to nothing about sending units. My experience is with the mechanical, not electrical.
Will this “universal” unit work?!
https://www.oreillyauto.com/detail/b/aut...unit&pos=3
Please help.
Recently bought a 1990 Geo Tracker with 97K miles. The guy I bought it from put in a new fuel tank and pump, but did not install a sending unit. I can’t find one new anywhere.
I’m sure there are others on here that have had issues finding OEM sending units.
However, I did find a “universal” one that’s adjustable for depth, and that reads empty at 240 Ohms, and reads full at 33 Ohms. I know from other posts here that Gen 1 sending units typically read around 120 empty, and 3 Ohms full.
I know next to nothing about sending units. My experience is with the mechanical, not electrical.
Will this “universal” unit work?!
https://www.oreillyauto.com/detail/b/aut...unit&pos=3
Please help.