Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
removing torque converter Bolts 1995 Sidekick
#3
(04-22-2017, 07:22 PM)lstill Wrote: Hey guys, pulling the motor on my 1995 Sidekick to rebuild. Got every thing ready yesterday to remove except the three torque converter bolts. I can see that the way there inset and hard to reach that there must be a good way to do it. If anyone has removed a 1.6 8 valve sidekick/Tracker motor please could use some advice here.....Thanks.......Larry

Here's what I built thé first time I had to remove thé engine... Back then, I had thé same problem with those 3 bolts... Thé space is kind if tight. It cost me about $10, and I have no problem anymore to remove those. I just did it again 3 days ago and it took me 15 min !!


Attached Files Thumbnail(s)
   
Reply


Messages In This Thread
RE: removing torque converter Bolts 1995 Sidekick - by john110 - 06-27-2017, 06:59 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)