01-16-2018, 10:32 AM
Those compression results were taken at normal operating temperature and 1800 ft in elevation. I did the math and optimum would have been around 183 psi.
once i receive the parts i will test the fuel pressure at the rail. it might take a week though. i did find a hairline crack in the cast manifold on the tube coming from the #4 cylinder. seems to circle around the back of the manifold. Should i worry about this?
while im waiting for parts i will test 02 sensor.
once i receive the parts i will test the fuel pressure at the rail. it might take a week though. i did find a hairline crack in the cast manifold on the tube coming from the #4 cylinder. seems to circle around the back of the manifold. Should i worry about this?
while im waiting for parts i will test 02 sensor.