01-11-2018, 07:15 AM
the coil is like 5 ohms primary and 20,000 secondary to case./
code 41 is :
coil primary dead. (or said other way the brown tacho wire is dead , no tach signals cracked.)
the ECU can not see the Ignitor pulse.
bad coil
bad ignitor
missing supressor.(fell off lost)
or as always bad wires to same above or connectors pins bad/corroded,. etc)to same devices. (parts)
good luck and hope it warms up..
code 41 is :
coil primary dead. (or said other way the brown tacho wire is dead , no tach signals cracked.)
the ECU can not see the Ignitor pulse.
bad coil
bad ignitor
missing supressor.(fell off lost)
or as always bad wires to same above or connectors pins bad/corroded,. etc)to same devices. (parts)
good luck and hope it warms up..
http://www.fixkick.com