06-27-2017, 06:59 AM
(04-22-2017, 07:22 PM)lstill Wrote: Hey guys, pulling the motor on my 1995 Sidekick to rebuild. Got every thing ready yesterday to remove except the three torque converter bolts. I can see that the way there inset and hard to reach that there must be a good way to do it. If anyone has removed a 1.6 8 valve sidekick/Tracker motor please could use some advice here.....Thanks.......Larry
Here's what I built thé first time I had to remove thé engine... Back then, I had thé same problem with those 3 bolts... Thé space is kind if tight. It cost me about $10, and I have no problem anymore to remove those. I just did it again 3 days ago and it took me 15 min !!