96 Tracker Speedo

[fixkick]

yes the cup bearing ,wrecks then wrecks the needle bad.
not sure your end goal there. 9 some want it all, others only need VSS working, heck with needle, other just want the noise to stop.
but yes, you can mix heads , by in 1 Generation , 96 -98 is yours.
there are lots of lamps you may need or not need,
but what really matters are connector count and there pin counts
the end of cable has plastic gears they match axles.

sorry you got ripped
you cant swap internal head guts (2 to 4doors), ive had to mix up to 3 to get one perfect head. But must have doors correct.
on many the missing lamps are there, wired, but need a lamp twist socket only
have you seen my head matrix tables?
wish you had posted both head bottom tags? but if GM tags, oops. i cant do those. only if head has real suzuki tag. some do.

lots of clear choices here
http://www.fixkick.com/sensors/speedo/cl...frack.html

13x10x16

96 rear
http://www.fixkick.com/sensors/speedo/sl...ge_13.html

http://www.fixkick.com/sensors/speedo/sl...ge_16.html


i have exploded parts list drawing on all,
i have steps to swap parts
i looked now
the 2door and 4door meters are different
you need a 2door head
the correct head is
34100- prefix
suffix
-68ab0 no ABS
-68aa0 ABS