02-07-2017, 09:17 PM
the numbers are hard to get out of one book
the author spoons one out at a time. page by page.
finding a good table can be hard.
the rod sides should be ok, its for finding heavy damage when rob big end bearing gets hot. (this gap also can change oil pressure)
the end play I think only goes bad on heavy used stick shift, actions, (theory)
good luck
(make sure the .050 head oil gallery orifice is clean) hint
cheers
the author spoons one out at a time. page by page.
finding a good table can be hard.
the rod sides should be ok, its for finding heavy damage when rob big end bearing gets hot. (this gap also can change oil pressure)
the end play I think only goes bad on heavy used stick shift, actions, (theory)
good luck
(make sure the .050 head oil gallery orifice is clean) hint
cheers
http://www.fixkick.com