Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1997 stuck in limp home?
#1
i have done a conversion on a samurai using the 1997 geo tracker engine. I totally rebuilt the motor and now that its running I am having tuning issues. the harness was modified by Trail Tough and done away with the crank position sensor as in my location I don't need to smog test. after driving I have pulled the codes with a generic code reader and have the following codes P0102,P0135,p0335.p0450,p0400,p0461,p1410. I am kinda at a loss as to where to start. the car is running really rich and has little power for a brand new engine. I am running a Thorley header and catalytic converter with a 2 inch exhaust. looking at buying a scanner with real time data but not sure on a brand or type that will do the necessary things I need. any help would be greatly appreciated.
Reply


Messages In This Thread
1997 stuck in limp home? - by ingler - 09-30-2016, 01:08 PM
RE: 1997 stuck in limp home? - by fixkick - 09-30-2016, 09:45 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)