07-29-2016, 11:06 AM
(This post was last modified: 07-29-2016, 11:07 AM by 02trackman.)
I have not yet checked to see if cam is turning.
I also only removed the black sensor not the aluminum housing whenever I changed cam sensor. I will hook my scanner up tomorrow and turn it over for 5 seconds and see what that gives me on info. Would I go under "live data" in my scanner while I am trying to crank the tracker?
Yes I only removed the sensor.
I also only removed the black sensor not the aluminum housing whenever I changed cam sensor. I will hook my scanner up tomorrow and turn it over for 5 seconds and see what that gives me on info. Would I go under "live data" in my scanner while I am trying to crank the tracker?
(07-29-2016, 08:20 AM)fixkick Wrote: tell me you only did this.
http://www.fixkick.com/IGN_timing/J20/cmp99+.JPG
see this is the only safe way.
Yes I only removed the sensor.