A/T 4speed fails, car wont move until hot.

[zukitrek]

Oh ok I can try the DIAG jumper in but I don't know if you remember the odd thing that was happening to me, car would not start or start and shut off if diag jumper was in.
That was before bad tranny repair but can try again. Not that the bad tranny was the reason, just saying it as a time reference.

Could it be that ECU is faulty? I have not taken it out to check the caps (too much things too do and very little time, as we speak buggy is parked again with whole front suspension and steering being repaired) but Ill find time to do it all hopefully. Ok i will be doing the Idle switch test shortly.

Gracias!!