11-12-2015, 03:48 AM
i know nothing, im blind here. (worse than a bat) (id need to be there, to see)
it check the idle switch (0v , each time you got to idle.)
then see if the DMM can read near center, 7vdc. it will if lucky.... (a across the ISC pins, now here else,2 pins, 2 meter leads, across them) probed.
not 0vdc
not 14vdc
if not near 7v, turn the bleed screw until the voltage moves to 7vdc (pay no mind to + and - symbols on LCD screen)
if it moves this voltage good, that means its alive. and working. and meter not fibbing to you.
some meters will not work here,
crossing fingers your meter works, and no other problems or bad idle switch. etc.
it check the idle switch (0v , each time you got to idle.)
then see if the DMM can read near center, 7vdc. it will if lucky.... (a across the ISC pins, now here else,2 pins, 2 meter leads, across them) probed.
not 0vdc
not 14vdc
if not near 7v, turn the bleed screw until the voltage moves to 7vdc (pay no mind to + and - symbols on LCD screen)
if it moves this voltage good, that means its alive. and working. and meter not fibbing to you.
some meters will not work here,
crossing fingers your meter works, and no other problems or bad idle switch. etc.
http://www.fixkick.com