10-30-2015, 09:47 PM
yes, the shifter rails most be in neutral forming a box, to install that lever.
12.5vd using a DMM? if a real dmm and its not frigid out 12.5 is a tad low.
12.6 down to 40F
http://www.fixkick.com/Charging/SOC2.JPG
if it dont crank at 12.5v (clicks solenoid), and charger cant make it higher, it's a gonnner... sorry.
happy for you to get this far, !!!!
12.5vd using a DMM? if a real dmm and its not frigid out 12.5 is a tad low.
12.6 down to 40F
http://www.fixkick.com/Charging/SOC2.JPG
if it dont crank at 12.5v (clicks solenoid), and charger cant make it higher, it's a gonnner... sorry.
happy for you to get this far, !!!!
http://www.fixkick.com