A/T 4speed fails, car wont move until hot.

[zukitrek]

what is the ecu part number on car. is the ECU in steel box, not aluminum is it the 33920-58Bxx series : this series has no troubles at all running diag mode, any which why you dream up. (sounds like the ECU has issues) what if that ISSUE, caused the ECU load calc', data to the TCM to be wrong, too.
the ECU has network wire (serial) to the TCM the ECU sends data to the TCM so the TCM can make smart decisions.

Here it is:

   

Zoom in a bit to see more clearly. It ends 00 one 0 positive and the other reversed. Has a big A2 at right of label and below in reverser type USA-AT

Is a mitsubishi model:

   

The TCM connector has been a bitch to pull out. Is it that hard? Jesus!!

Still checking TV.