10-17-2015, 03:40 AM
Yes I put the clip on the 6 pin connector, jumping 2-4. I get 12's endlessly. I tried starting her up with clip still on but it would not or did, but then shut off. Ill try doing it with engine already on and see.
Well now is 10 min many months ago was 7 minutes, heck even 10 seconds is bad. But tittle of thread was clear and I did not want to start another thread if many things were already covered or discussed.
What about idle too low? Can I fiddle with the bleed screw? 02 sensor is also new, as well as cap, rotor, sparks and wires. Even now new battery is in.
Maybe I thought about getting a donor tranny and then overhauling mine in the future, just to get car back on the road. Cant afford a shop repair, not these days or never with such high price tags on repairs.
Will let you know.
Well now is 10 min many months ago was 7 minutes, heck even 10 seconds is bad. But tittle of thread was clear and I did not want to start another thread if many things were already covered or discussed.
What about idle too low? Can I fiddle with the bleed screw? 02 sensor is also new, as well as cap, rotor, sparks and wires. Even now new battery is in.
Maybe I thought about getting a donor tranny and then overhauling mine in the future, just to get car back on the road. Cant afford a shop repair, not these days or never with such high price tags on repairs.
Will let you know.
Sidekick 94, 1.6L Engine 16v
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico
4 spd Auto Tranny
4 Door 2RWD
Puerto Rico