A/T 4speed fails, car wont move until hot.

[zukitrek]

Good day sir. As of now doing compression test. Yes ecu flashed 12's on demand. What happened was car would not start or start and die if jumper was left for codes. Strange? Last night I did the freeze jump thing pin 4 to 5 and no bouncing but noticed crank mark was not aligned to 8btdc mark on cover. That has to be fixed. Compression came out super, engine hot, WOT 1-4 in the same order: 195-200-200-200. Will need to get tools for testing FPreg. Will keep you posted. One thing thoug and keep in mind, if tranny is good why it takes 10 minutes to move while on drive after warm up on the very first start of the day? Could fuel probs affect it this way too?

Regards!!!

BTW all spark tips look good. will send you pics later on.