Login Register

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
welding a broken clutch pedal back together
#4
thanks! for that shaft end, photo. some have splines..
thanks to one contrib.named mike.
we have these nice shots. too


http://www.fixkick.com/tranny/clutch/mik...index.html

other pedal drag causes.?

1: collapsed throw out bearing
2: or bearing just jamming on its guide (front of trans)
3: or the clutch disk spline jamming. (it bad or the splined pilot shaft galled)
4: damage to the forked, throw out actuator rod, assembly, or bushing failure there, or one fork busted off or bent.
http://www.fixkick.com
Reply


Messages In This Thread
RE: welding a broken clutch pedal back together - by fixkick - 09-28-2015, 09:02 AM

Forum Jump:


Users browsing this thread: 2 Guest(s)