09-26-2015, 11:18 AM
Hi, I’m new here and new to Sidekicks/Trackers.
I have read almost every FixKick webpage (so much great info; thank you FixKick!) and much of these forums but still cannot find some answers.
If I’m a blind idiot please point me in the right direction.
I’ve picked up a 1997 Tracker cheap because the clutch pedal has broken …again.
1997 Geo Tacker base 4 door, 5-speed, 4WD [VIN 2CNBJ12666V690…]
Square end clutch pedal rod.
1.
I cannot find anyone selling the pedal (arm & rod) or the pedals assembly.
Is anyone still selling parts?
1b.
So many part numbers on FixKick (Thank you!) but I’m not sure which one/ones are correct— 49810-62AF1, 49810-58B21, 91173175, 91172672.
2.
My clutch pedal arm has been welded once or twice before. I expect to weld it again but I don’t know the correct position/angle.
Does anyone have the Arm angle position (relative to a fixed part, eg: the upper stop)?
(Yes. I have a fresh clutch cable ready to install.)
Thanks Stephen
I have read almost every FixKick webpage (so much great info; thank you FixKick!) and much of these forums but still cannot find some answers.
If I’m a blind idiot please point me in the right direction.
I’ve picked up a 1997 Tracker cheap because the clutch pedal has broken …again.
1997 Geo Tacker base 4 door, 5-speed, 4WD [VIN 2CNBJ12666V690…]
Square end clutch pedal rod.
1.
I cannot find anyone selling the pedal (arm & rod) or the pedals assembly.
Is anyone still selling parts?
1b.
So many part numbers on FixKick (Thank you!) but I’m not sure which one/ones are correct— 49810-62AF1, 49810-58B21, 91173175, 91172672.
2.
My clutch pedal arm has been welded once or twice before. I expect to weld it again but I don’t know the correct position/angle.
Does anyone have the Arm angle position (relative to a fixed part, eg: the upper stop)?
(Yes. I have a fresh clutch cable ready to install.)
Thanks Stephen