09-07-2015, 05:09 AM
Great. Thanks for your reply
Now knowing it’s a press-fit and with no experience applying a good loosening technique I tried but feared I could end up breaking it.
So ended up tightening the upper bolt of the reclining assembly, inserting a 12mm spanner between the reclining assembly and the seat cover. (Encircled in diagram)
Now front-seat back rest has no play!
Thanks again!
Now knowing it’s a press-fit and with no experience applying a good loosening technique I tried but feared I could end up breaking it.
So ended up tightening the upper bolt of the reclining assembly, inserting a 12mm spanner between the reclining assembly and the seat cover. (Encircled in diagram)
Now front-seat back rest has no play!
Thanks again!