07-16-2015, 09:24 PM
are you sure its G16 16valve or is it 8 valves.?
my web page uses USA years,
out side USA. the 8v engine was used for many years after 1995, up to 2004 ?
BIAS:
the 8v engine will do that and requires loosing the valve lash adjusters, because of the missing 8 other valves and 8v bias pushing back.
if truly an 16v engine and it pushes back ,the cam
then my guess is the I/E marks are wrong on the cam cog drive wheel.
please tell me valve count for sure....?
my web page uses USA years,
out side USA. the 8v engine was used for many years after 1995, up to 2004 ?
BIAS:
the 8v engine will do that and requires loosing the valve lash adjusters, because of the missing 8 other valves and 8v bias pushing back.
if truly an 16v engine and it pushes back ,the cam
then my guess is the I/E marks are wrong on the cam cog drive wheel.
please tell me valve count for sure....?
http://www.fixkick.com