condenser type?

[Vitalie]

ugh ! im not sure, id have to see it. most you can tell by the ends, how its fitted up.
good luck getting it to go... nice project.

To answer my own question. A closer look to the ports and you can see multichannel passages. so it is a parallel flow condenser. Now I am getting more hesitant putting it back as they recommend changing it.
   

By the I found my condenser on rockauto in Suzuki Sidekick, it is missing in geo/chevy trackers.

As o matter of fact the "new" compressor that I ordered turn to have a bunch of debris of metal shavings and junk in it after I check the oil. It is going back to the store. By the manufacturer it is required to have a clean system for it not to fail and to warranty it.
   

So the project is on hold till I am confident my system is a clean as I can get it.

You actually don't have to take the whole dashboard to get to the evaporator. only if you want to to get to the heater core. other than that I took the blower case first. those upper bolts are a PITA to take off as they are right behind the bar so you will be using a wobble socket. also you get the air bag off, not big deal but just the angle to work is real pain.