Plugs have red oily stain and misfire

[zukitrek]

Sir I have been giving it more thought, the oil ingress thing, and I took this old map schematic of the cvcc system and did some drawings to explain myself. The majority of my oil is in the threads and tip of spark. If it was a very bad oil control ring prob, and if the piston was at the bottom,

   

oil would flow down the cylinder not accumulating near the spark or valve? this all not ruining, just hand turning it to be on the down stroke. But lets say and looks like it, that aux valve holder was the prob, only tip would be the problem and why threads? Maybe a crack in that area. Like you said the whys are not important, just curiosity. Prob was not present before rebuild(that i can remember), so it must be something (bad valve holder plus old copper washer) or something I skipped.

Regards.