11-26-2014, 09:19 PM
welcome back .
bingo, that is a Canada Federal Car, see maple leaf sticker to the right (1/2 of it shown photo 1) . Thanks for Photo, I collect these and add them to my show.
still fitted with EGR main valve I see.
does it have a CAT converter at end of exhaust heater manifold?
the Caps leak boric acid at death, i'd get a used working ECU. and make this old one a spare,.
the oxygen sensor on top of the Exhaust manifold , is that wire (s) missing there.
there are many used ECU on ebay here. but you must find one willing to do shipping , so far.
the trick to making that ECU run right
would be to neutralize that acid (backing soda works)
the repair copper PCB trace damage.
and last new caps.
some are so bad , its hopeless... if the acid is heavy and long set.
bingo, that is a Canada Federal Car, see maple leaf sticker to the right (1/2 of it shown photo 1) . Thanks for Photo, I collect these and add them to my show.
still fitted with EGR main valve I see.
does it have a CAT converter at end of exhaust heater manifold?
the Caps leak boric acid at death, i'd get a used working ECU. and make this old one a spare,.
the oxygen sensor on top of the Exhaust manifold , is that wire (s) missing there.
there are many used ECU on ebay here. but you must find one willing to do shipping , so far.
the trick to making that ECU run right
would be to neutralize that acid (backing soda works)
the repair copper PCB trace damage.
and last new caps.
some are so bad , its hopeless... if the acid is heavy and long set.
http://www.fixkick.com