11-26-2014, 12:17 AM
sure you need tools. sure.
special no.
all are off shelf at your friendly auto store, (wheel bearings , excepted)
good not rebuilding yours. that is more steps.
floor jacks and stands
wrenches, snap ring tool ,expanding
the axle have only 2 captive points, the snap ring and the inboard mounts.
for joint rework check this out
http://www.acksfaq.com/cvhalfshaft.htm
special no.
all are off shelf at your friendly auto store, (wheel bearings , excepted)
good not rebuilding yours. that is more steps.
floor jacks and stands
wrenches, snap ring tool ,expanding
the axle have only 2 captive points, the snap ring and the inboard mounts.
for joint rework check this out
http://www.acksfaq.com/cvhalfshaft.htm
http://www.fixkick.com