11-26-2014, 12:01 AM
Thanks FixKick a lots.
I don't know much about electronic and machine so I don't feel confident.
With the help of the Forum, I will try to examine my ECU. Firstly, I will replace all the caps and injector drivers.
My car is still in good condition and it functions well. But the "check engine lamp" keeps flashing all time. When my car ran with 44 - 62 miles, under the outdoor temperature of 95 F, the engine stopped and there was smell of gasoline. After 30 to 60 minutes later, it became normal again.
Anyway, I still want to look for an ECU 33920-60A32 for backup purpose, because my car has been used for more than 20 years already.
Question: Are the locations of Capacitor and Injector Drivers marked correctly in the attached image?
I don't know much about electronic and machine so I don't feel confident.
With the help of the Forum, I will try to examine my ECU. Firstly, I will replace all the caps and injector drivers.
My car is still in good condition and it functions well. But the "check engine lamp" keeps flashing all time. When my car ran with 44 - 62 miles, under the outdoor temperature of 95 F, the engine stopped and there was smell of gasoline. After 30 to 60 minutes later, it became normal again.
Anyway, I still want to look for an ECU 33920-60A32 for backup purpose, because my car has been used for more than 20 years already.
Question: Are the locations of Capacitor and Injector Drivers marked correctly in the attached image?