ok, ill try to look, but i dont have spare here, ive never had one go bad, but then , my wires are never allowed to fray or short....
are you saying this burn spot here is missing brass
http://www.fixkick.com/bbs2/Suzuki-bbs/a...hp?aid=151
if yes, im not sure how to fix that, you might try , new brass sheet and epoxy?
the fuse would blow before that damage, maybe it was blown 90% by last owner (fuse wrong) then you had it over load with a short again. and the 10% brass
could not take normal current or small overload and poof. smoke.
time times thing go bad in stages, not all at once, and damage is progressive.
the car is old and may have had hard times. no>??
ive seen so many cars where owners blow a fuse and wrap it in foil then the wires or $230 switches melt, all for a wire cut at a corner lamp.
not you, the other guy.
you may be , just the owner of a very abused switch. the lamps down draw much.
2 amps time 2 or 4 amps. total but are flashing so is only 2 amps average.
so the contacts last for ever until someone buys crap china bulbs, turns them to hard (like 1gram wrecks the POS lamps) and then it shorts.
now the current is infinity. the fuse blows, and all is good.
if some funny guy , puts foil on the fuse or uses a 30amp, the $230 combo burns up.
that is how it all happens the cure , who knows.?
but being a skin flint, id try to fix it.
id even do epoxy brass rebuilds.
or find one at wrecker.
last new.
tell me, why not find which pads are yellow pad./
then use pc paint and put an arrow to it, and repost the photo.
so i can see what is bad there, or better use a camera with macro feature (switch) and take a real close photo of yellow pad.
then its MATE.
keep in mind ,im in a 2D world (www photos) and your switch is 3D, i cant see 3D at all (like thickness or bends eTC)
the list part (mate) the moving contacts
i can not see what is called REcession.
if the plastic melts the moving contact , holder and base , can melt and recede.
if that happens , it fails to make contact.
if that happens , i shim the lil' bugger.
keep in mind, its just and over glorified knife switch.
brutal, simple to a fault.
one contact moves, other is fixed.
are you saying this burn spot here is missing brass
http://www.fixkick.com/bbs2/Suzuki-bbs/a...hp?aid=151
if yes, im not sure how to fix that, you might try , new brass sheet and epoxy?
the fuse would blow before that damage, maybe it was blown 90% by last owner (fuse wrong) then you had it over load with a short again. and the 10% brass
could not take normal current or small overload and poof. smoke.
time times thing go bad in stages, not all at once, and damage is progressive.
the car is old and may have had hard times. no>??
ive seen so many cars where owners blow a fuse and wrap it in foil then the wires or $230 switches melt, all for a wire cut at a corner lamp.
not you, the other guy.
you may be , just the owner of a very abused switch. the lamps down draw much.
2 amps time 2 or 4 amps. total but are flashing so is only 2 amps average.
so the contacts last for ever until someone buys crap china bulbs, turns them to hard (like 1gram wrecks the POS lamps) and then it shorts.
now the current is infinity. the fuse blows, and all is good.
if some funny guy , puts foil on the fuse or uses a 30amp, the $230 combo burns up.
that is how it all happens the cure , who knows.?
but being a skin flint, id try to fix it.
id even do epoxy brass rebuilds.
or find one at wrecker.
last new.
tell me, why not find which pads are yellow pad./
then use pc paint and put an arrow to it, and repost the photo.
so i can see what is bad there, or better use a camera with macro feature (switch) and take a real close photo of yellow pad.
then its MATE.
keep in mind ,im in a 2D world (www photos) and your switch is 3D, i cant see 3D at all (like thickness or bends eTC)
the list part (mate) the moving contacts
i can not see what is called REcession.
if the plastic melts the moving contact , holder and base , can melt and recede.
if that happens , it fails to make contact.
if that happens , i shim the lil' bugger.
keep in mind, its just and over glorified knife switch.
brutal, simple to a fault.
one contact moves, other is fixed.
http://www.fixkick.com