11-24-2014, 12:31 PM
use the ohm meter , (continuity checks)
to find what contacts, are yellow,
the switch that connects to yellow is bad.
with meter connect to yellow. pin.
then with other meter lead touch all the contacts , finding the the one that is 0 ohms.
this is the bad switch, then find out why its bad. (observe it carefully)
to find what contacts, are yellow,
the switch that connects to yellow is bad.
with meter connect to yellow. pin.
then with other meter lead touch all the contacts , finding the the one that is 0 ohms.
this is the bad switch, then find out why its bad. (observe it carefully)
http://www.fixkick.com