Turn signals out after smoke in combo switch

[zukitrek]

So what you mean is I should get the test light for better testing? Needle won't work? Lets say I pinch the green wire with needle and touch it key on will the DMM go from 0 to 12v if there is power to it? Or it does not work that way, only real light? There are 12v from turn fuse and hazard fuse all the way to combo switch but no power to relay in that yel/wht wire (pin 3) going into relay? Nor green? All of this done with the needle. Maybe I'm complicating matters?


J