Turn signals out after smoke in combo switch

[zukitrek]

Sir Fix. just finished back probing the pins you indicated in the wiring diagram. Yellow wire from turn fuse has 12v with key on all the way until combo switch. Yel/white and green wire going into de hazard turn relay have no volts. Black is also no volts with key on. At least in my harness going into the combo switch there is no yel/green/ There is a Green/yell which I tested and has no volts. Are we looking for a bad relay? I totally forgot about these relays. Hope you can make something out of this. Still have not done the good/new bulb test on the turn signals to isolate problem (civic has been keeping me busy lately) anyways let me know what your thoughts are about this. Here is the pic of my harness going into the combo switch.

   

   


As you can see there is no yellow/green going into the combo like in the diagram?

Regards!!!