if too high, then it was topped off hot.
or overfilled cold.
to check oil , so do in in AM first run, after all oil is in the pan. every drop. (mostly)
or is foamed up, overfilling it can cause the crank shaft to wipe i to foam , a very bad idea. foam done lube rods or mains.
1: over filled
2: short sticked.
3: foamed
4: gas in oil
5: other fluids there. ouch
6: filled hot.
7: filled running , OMG.
i hope it is 2
or overfilled cold.
to check oil , so do in in AM first run, after all oil is in the pan. every drop. (mostly)
or is foamed up, overfilling it can cause the crank shaft to wipe i to foam , a very bad idea. foam done lube rods or mains.
1: over filled
2: short sticked.
3: foamed
4: gas in oil
5: other fluids there. ouch
6: filled hot.
7: filled running , OMG.
i hope it is 2
http://www.fixkick.com
