Maybe try the guys at http://www.hwy83suzukisalvage.com/
Looking at it and thinking of how one would make that bar, I'd say the hardest part is to make the plates where it mounts onto the chassis. If that part is not damaged it would look like a simple fix to just cut off the cracked pipe section and weld a new piece on and spray paint it. Of course in case you don't find it new anymore.
Looking at it and thinking of how one would make that bar, I'd say the hardest part is to make the plates where it mounts onto the chassis. If that part is not damaged it would look like a simple fix to just cut off the cracked pipe section and weld a new piece on and spray paint it. Of course in case you don't find it new anymore.
1996 Geo Tracker, CAMI, 16 valve, 5sp, 4x4, soft top, 2 door, no a/c