08-12-2014, 03:31 AM
reverse grinds
is dragging clutch, any part, can do that, the pressure plate, warped, or not retracted fully due to bad pp springs. or cracked disc, or pilot bearing seizure. and even a very bad flywheel surface.
usually a bad flywheel will only cause jerky starts.
ive never heard of AMS.
how ever Rockauto listing them adds some credence. i could not learn anything about them....which scares me... sorry.
usually i never buy the rock top listed listed part, that is cheapest. i just avoid them. as a matter of practice.
#2 on there list is ok.
is dragging clutch, any part, can do that, the pressure plate, warped, or not retracted fully due to bad pp springs. or cracked disc, or pilot bearing seizure. and even a very bad flywheel surface.
usually a bad flywheel will only cause jerky starts.
ive never heard of AMS.
how ever Rockauto listing them adds some credence. i could not learn anything about them....which scares me... sorry.
usually i never buy the rock top listed listed part, that is cheapest. i just avoid them. as a matter of practice.
#2 on there list is ok.
http://www.fixkick.com