08-11-2014, 08:38 PM
Vitalie,
My clutch is doing the exact same thing. If I adjust to the fsm specs, I can't get it into gear without grinding. If I overtighten the cable it seems fine. I get a slight clunk in second gear, but the rest of the gears are fine.
Probably a worn out clutch/throwout bearing as fixkick says.
I think it's easiest to pull the whole engine versus trying to change the clutch from under the car. I think I'll drive it some more before pulling the motor.
John
My clutch is doing the exact same thing. If I adjust to the fsm specs, I can't get it into gear without grinding. If I overtighten the cable it seems fine. I get a slight clunk in second gear, but the rest of the gears are fine.
Probably a worn out clutch/throwout bearing as fixkick says.
I think it's easiest to pull the whole engine versus trying to change the clutch from under the car. I think I'll drive it some more before pulling the motor.
John
95 Geo Tracker, Build Date 1/95,16v, Fed, Cami, 4x4, MT, Headed for Grenada.